Top 10 Gaming PC Case With FANS UK – Computer Cases

As an Amazon Associate I earn from qualifying purchases.

1. CiT

8 Fan Support, LED Button, Water-Cooling Ready | Black, Micro-ATX, Tempered Glass, CiT Flash ARGB PC Gaming Case, 4 x 120mm ARGB Rainbow Fans Included

CiT - Design - the flash has the perfect balance between style and functionality the sleek front panel design made using tempered glass behind the front panel is three pre-installed rainbow fans help create a stunning illusion. Tempered glass - a full left side tempered glass panel has been included allowing the user to show off their finished build and it also shows off the glow from the included rainbow fans.

Cooling configurations - the flash includes four rainbow fans You also have the option to install an AIO water cooler with room to fit a 240mm radiator at the front and top A 120mm radiator can be fitted at the back of the case. Internal components and drives - made using an all-black interior the flash has plenty of space to fit higher- end hardware to boost the overall performance of your system With room to fit an Micro-ATX motherboard and a graphic cards up to 340mm in length You can fit one 2 5 inch SSD or a 3 5 inch HDD on the PSU shroud or one of each at the bottom of the Flash.

Led button - easily control your fans and have access to several colour modes at the touch of a button once connected your reset switch can be used to switch between the different colour modes.
BrandCiT
ManufacturerA One Distribution (UK) Ltd
Height39.7 cm (15.63 Inches)
Length38.4 cm (15.12 Inches)
Width19.5 cm (7.68 Inches)
Part NumberCITFLASH
ModelCITFLASH
Warranty12 Month

2. CiT

6 Halo Single-Ring Blue LED Fans, Tempered Glass, Water-Cooling Ready, Mid-Tower ATX, CiT Blaze PC Gaming Case, For Enhanced Gaming | Black

CiT - I/o ports - usb2. 0 x 2, usb3. 0 x 1 and HD Audio. Body material is 05mm spcc Metal. Expansion Slots 7 x Full Height. Tempered glass - the front and left side tempered glass allows you to show off your internal components. Water-cooling support - Front panel supports a 240mm radiator. Fans - 3 x 120mm single blue led ring fans on the front panel, 2 x 120mm single Blue LED ring fans on the top cover and 1 x 120mm single Blue LED ring fan on the rear.
BrandCiT
ManufacturerA One Distribution (UK) Ltd
Height44.2 cm (17.4 Inches)
Length42 cm (16.54 Inches)
Weight5.5 kg (12.13 Pounds)
Width20 cm (7.87 Inches)
Part NumberCIT-BLAZE
ModelCIT-BLAZE
Warranty12 Months

3. CiT

Ring Spectrum Fans, RGB, Tempered Glass, RF Controller, CiT Raider PC Gaming Case, PCB Hub w/ Aura Connectivity, For a Great Gaming Experience | Black, Mid-Tower ATX, MB Sync, Six Fans, 6 x Halo Dual

CiT - A pcb hub is included and can fit up to 10 devices. Troubleshoot: if one of the fans doesnt work, connect the original connector to the previously working fan, try disconnecting the fan & reconnecting. The rf remote controller included gives you the option of six single colours and several different lighting modes so you can stand out from the crowd.

Please note only fours fans are fitted. If still no success, please try switching the fan to a different connector of a working fan, and see if it then works. 4mm thick tempered glass front and left side offers a professional look but allows you to show off the spectrum lighting. The raider supports a radiator up to 240mm at the front, at the top a radiator up to 240mm and at the back a 120mm radiator to give you extensive cooling support.

A sata and a 3pin asus connector included connecting to your motherboard, giving you multiple options. The raider includes six dual-ring rainbow rgB fans to keep your build constantly cool and you can add some stunning LED lighting effects. Also, and see if it works.
BrandCiT
ManufacturerA One Distribution (UK) Ltd
Height45.5 cm (17.91 Inches)
Length41.3 cm (16.26 Inches)
Width20.1 cm (7.91 Inches)
Part NumberCIT-RAIDER RGB 6
ModelCIT-RAIDER RGB 6
Warranty12 Months Warranty

4. CiT

CiT Phantom Mesh Micro-ATX ARGB PC Gaming Case, Tempered Glass Side Panel | Black, 4 x ARGB Fans

CiT - Tempered glass panel - cit have made the phantom so easy to build in and featuring a solid tempered glass side panel with a hinged door design, screwless, making it even easy to build inside. High airflow, stylish front panel - the front panel of the CiT Phantom is a stylish & unique one with a polygonal-shaped design and made entirely of mesh provides ample airflow into your system for more efficient cooling and exquisite looks.

This micro-atx casing also can fit a 360mm radiator at the front, a 240mm radiator at the top and a 120mm radiator in the rear of the case. Argb led fans - the four argb fans that are pre-installed are available with approximately 30 colour LED combinations, simply plug in the power and using the LED button easily switch between the LED modes and enjoy the visual experience.

Motherboard sync - take your colour to new levels with the included Aura Sync Cable, easily connect the 3 Pin AURA to a 5V 3 Pin connection on a compatible motherboard and you can use the mobo software for system-wide lighting synchronization. Cooling support - four factory installed argb fans are pre-installed and with support for another two fans Top: Space For 2 x 120mm Fans.
BrandCiT
ManufacturerA One Distribution (UK) Ltd
Height42.6 cm (16.77 Inches)
Length37 cm (14.57 Inches)
Weight4.2 kg (9.26 Pounds)
Width20.1 cm (7.91 Inches)
Part NumberCIT-PHANTOM
ModelCIT-PHANTOM
Warranty12 Months Warranty

5. MARSGAMING

Dual Tempered Glass Windows, Compact Micro-ATX Gaming PC Case, 4x 12cm Fans, MarsGaming MC61 Black, ARGB Chroma

MARSGAMING - Extreme cooling: the mc61 gaming tower eliminates all temperature problems while maintaining silence thanks to the extreme airflow offered by its 4 pre-installed 120mm fans 2 front and 2 top and its 360º openings with no flow restriction.

Premium compact: the mc61 compact tower is designed for board sizes up to Micro-ATX, support for liquid cooling up to 240mm, capacity for up to 3 HDDs and internal cable management. Double glass windows: featuring two full tempered glass windows, the MC61 premium gaming case allows you to show off your PC in all its glory. Chroma argb controller: the mc61's lighting system provides up to 40 pre-installed CHROMA RGB lighting modes controllable via RF remote control and includes a standard ARGB connection to synchronize lighting with compatible motherboards or controllers.
BrandMARSGAMING
ManufacturerMars Gaming
Height50 cm (19.69 Inches)
Length54 cm (21.26 Inches)
Weight5.23 kg (11.53 Pounds)
Width23.4 cm (9.21 Inches)
Part NumberMC61
ModelMC61
Warranty3 year manufacturer

6. GameMax

1 x 120mm ARGB Rear Fan Included, ATX, Water-Cooling Ready | Black, GameMax Black Hole ARGB Mid-Tower PC Gaming Case, 3 Pin AURA Sync, 5 Fan Support, 2 x 200mm ARGB Fans Included, ARGB Hub

GameMax - Once all connected enjoy pwm auto speed controlled via mb’s pwm signal, connect up to five fans and two LED strips, also 2 RGB buttons Mode & Brightness, it much better for user to easy adjust light mode and adjust between 5 different brightness modes 0-20-40-80-100%. Fit an atx motherboard and with plenty of room you can fit a wide selection of top hardware, meeting most installation requirements.

A 3mm full left side tempered glass panel to show off your build from all angles. Excellent cooling options are on offer with two 200mm fans at the front are not only more efficient but a lot quiter compared to mounting 120mm fans, mount a total of eight fans and room to mount water cooling radiators on the front Up to 360mm, top Up to 280mm and rear Up to 120mm your case will have no problem cooling those high end components. The black hole is a brilliantly designed mid-tower pc gaming case and the first gameMax chassis to include two 200mm ARGB fans not only will these look great in your gaming set up but enable exceptional airflow.

You can now take your colour control to new levels with the included ARGB motherboard connection on the PWM hub, simply connect the 3pin AURA from your motherboard and you can use the mobo software to sync your fans and strips the way you like. Gpu bracket - the chassis includes a bracket designed for support to the graphics card, prevents sag and the bracket allows for the installation of larger graphic cards. Included in the black hole is an argb v2. 0 argb pwm hub, have access to 18 colour modes manually or have even more using the motherboard software.
BrandGameMax
ManufacturerA One Distribution (UK) Ltd
Height46.6 cm (18.35 Inches)
Length41.4 cm (16.3 Inches)
Weight6.45 kg (14.22 Pounds)
Width21.5 cm (8.46 Inches)
Part NumberGMX-BLACKHOLE
ModelGMX-ARGB HOLE
Warranty12 Months Warranty

7. MSI

MSI MPG SEKIRA 100P Mid Tower Gaming PC Case, 4 x 120mm system fans; E-ATX; ATX; M-ATX; Mini-ITX; USB 3.2 Gen2 Type-C; Tempered Glass Window; Magnetic Dust Filter; Top Vent Lid

MSI - The top vent lid provides additional system airflow and comes with a magnetic dust filter for easy removal and cleaning. The mpg sekira 100p comes with 4 fans and has room for up to 6 fans. Synergize mpg sekira 100 series with an msi motherboard by bridging a USB Gen2 Type-C port with 10 Gbps for convenient access. A total of three filters have been placed to prevent dust from entering the system. The mpg sekira 100p supports gpus up to 340mm long and CPU coolers up to 170mm high. Mid-tower gaming pc case that supports E-ATX / ATX / M-ATX / Mini ITX.
BrandMSI
ManufacturerMSI
Height47.5 cm (18.7 Inches)
Length42 cm (16.54 Inches)
Weight8.35 kg (18.41 Pounds)
Width21.5 cm (8.46 Inches)
Part Number306-7G06P11-W57
Model306-7G06P11-W57
Warranty2 Year Manufacturer

8. GameMax

Acrylic Side Panels | Black, 4 x 120mm Dual-Ring Rainbow Fans Included, GameMax Optical Mid-Tower ATX ARGB PC Gaming Case

GameMax - Cpu cooler height of 160mm and Max. Internal structure - the optical 467 x 206 x 503 in diameter is a mid-tower chassis supporting an ATX motherboard, four internal hard drives, Max. Perfect design - the optical's style, individuality, streamline appearance and attention to detail make this the ideal chassis for gaming fanatics! Made using acrylic - another feature that stands out is both side panels and front panel are made of transparent acrylic creating a high transparency visual effect.

Want easy control over the four fans included, use the RF remote controller and there is even a manual fan controller on the top I/O to control the speed of the fans only.

Optimal airflow - effective and intelligent cooling capabilities with several air intakes located on the front and heat dissipation at the top and rear and room to fit eight fans help release the case internal heat swiftly. Cooling and water cooling - supports eight fans and the optical includes four Rainbow Dual-Ring Fans. Gpu length of 360mm ensures you can build a neat gaming rig.
BrandGameMax
ManufacturerGameMax
Height50.3 cm (19.8 Inches)
Length46.7 cm (18.39 Inches)
Weight4.6 kg (10.14 Pounds)
Width20.6 cm (8.11 Inches)
Part NumberGMX-G510BK
ModelGMX-OPTICAL-BLK
Warranty12 Months Warranty

9. ionz

IONZ KZ02 PC MIDI TOWER CASE M/ATX GAMING TEMPERED GLASS WITH 3 iONZ FRGB FANS

ionz - The tempered glass case has protective Film, Inside and Out. This film protects the Glass during shipping and must be removed prior to use.
Brandionz
Manufacturerionz
Height42.5 cm (16.73 Inches)
Length35 cm (13.78 Inches)
Weight4.65 kg (10.25 Pounds)
Width18.5 cm (7.28 Inches)
Part NumberKZ02FRGB3

10. GameMax

ARGB Hub, M-ATX, 4 x 120mm ARGB Fans, 5 Fan Support, High Airflow Mesh Front Panel, GameMax Aero Mini ARGB Airflow PC Gaming Case TG, Mobo Sync, Unique Look With BLK EXT & WHT INT | Black/White

GameMax - Motherboard sync - you can now take your colour control to new levels with the included aura sync cable, easily connect to the Aura Sync Switch on the PWM hub and simply connect the 3 Pin AURA to a 5V 3 Pin connection on a compatible motherboard and you can use the mobo software to sync your fans and strips the way you like and have even more access to more LED colour modes! Argb hub included - included in the aero mini is the 1.

62 argb pwm hub and is a controller that has it’s very own built – in lighting program. Connect up to five fans and two LED strips, have access to 18 colour modes manually or have even more using the motherboard software. Exterior and interior - with a unique look the aero mini includes a combination of black exterior for easy maintenance and a white coloured PSU shroud and motherboard plate on the inside enhancing the ARGB illumination creating a stunning PC gaming case. Integrated mesh front panel - the mini aero is a m-atx high airflow performance chassis thanks to the full U shape integrated mesh front panel with mesh holes 1mm in diameter, directing cold air inside, designed for excellent airflow.

Please note the included ARGB PWM hub can only connect to 5 fans. Gpu bracket - the chassis includes a bracket designed for support to the graphics card, prevents sag and the bracket allows for the installation of larger graphic cards. High efficiency heat dissipation - dual internal layout optimised for maximum airflow and support of six fans four 120mm pre-installed ARGB fans and water cooling support across the front and rear.
BrandGameMax
ManufacturerA One Distribution (UK) Ltd
Height41.7 cm (16.42 Inches)
Length38.3 cm (15.08 Inches)
Weight5.4 kg (11.9 Pounds)
Width19.3 cm (7.6 Inches)
Part NumberAERO-MINI-WI
ModelGMX-AERO-MINI-WI
Warranty12 Months Warranty