As an Amazon Associate I earn from qualifying purchases.
E27 Lamp Holder Base, 4pcs, White, Edison Screw E27 Wall Socket, E27 Screw Light Bulb Socket Holder, AC 220-250VAkynite
- Application: the e27 base holder is a practical fitting for wall/ceiling lighting fixture. Screw in type light fitting, garage, dry basement, an inexpensive replacement fitting to be used in a workshop, high temperature resistant 500℃, shed or attic/loft. Note: the mounting screws are not included.
Good for temporary lighting and recessed lighting, storage room, garage, such as night lights, terrace, balcony, attic, basement, rear porch, corridor, bedroom, pendant light, workshop, wall lamp, ceiling light, loft, ceiling fan lights. Easy for installation: small size Ø91*53mm, with decent amount of room in the back.
The simple e27 lamp base is very suitable for temporary lighting in new buildings. Do not touch the bulb during heating to avoid burns. Simple e27 lamp base can help to create lighting effects for bedrooms or special days, the maximum power of the bulb is 60W.
Compatibility: lamp holder e27 white with screw thread, you can choose from modern style, retro style, UV LED. As the plastic housing is fragile, direct connection to AC 230V. E27 bulbs can be seen everywhere, colorful bulbs, suitable for E27 spiral LED bulb, such as mini disco. The base is made of flame-retardant material. The power cord can be well covered, simple wiring, easy and convenient for installation, so be careful not to over tighten the bulb.
|Manufacturer||Warm Lighting Co., Ltd|
|Height||5.3 cm (2.09 Inches)|
|Length||9.1 cm (3.58 Inches)|
|Width||9.1 cm (3.58 Inches)|
|Warranty||A new replacement or refund is available during the 1 year warranty.|
Skytronic Lyyt | Lamp Socket Converter | B22 to E27, Bayonet to EdisonLyyt
- Lamp socket converter B22 to E27. Conforms to bs EN60238. Max load - 60 watt. Manufactured by Mercury. A lamp socket to convert a bayonet cap fitting to an edison screw fitting.
|Height||2.01 cm (0.79 Inches)|
|Length||2.01 cm (0.79 Inches)|
|Weight||0.02 kg (0.04 Pounds)|
|Width||2.01 cm (0.79 Inches)|
|Warranty||One year manufacturers warranty.|
0~250V, DiCUNO B22 to E27 Socket Adapter, Max Wattage 200W, 2-Pack, Bayonet to Screw Converter, BC to ES Adopter, 165 Degree Heat ResistantDiCUNO
- Please do not screw or push it too hard! Any problem please contact DiCUNO first, we will provide solutions. Safety: the max wattage is 200w, voltage is 0-250V.
Ce certificated. Application: widely used. Fit for indoor use only, bedroom, such as, office, drawing room and so on. Immediate Customer Service!165℃ heat resistant. Warranty: 3-month refund and 1-year warranty.
No need tools to install, simply screw the socket adapt into B22/Bayonet type socket, then screw in E27 bulb. Tips please keep it out of a small confined space for heat dissipation. Type: the heigh of dicuno b22 to e27 converter of vintage bayonet version is 61mm, which is more compatible and can suit all E27 bulb.
|Height||6.1 cm (2.4 Inches)|
|Length||0 cm (0 Inches)|
|Width||0 cm (0 Inches)|
|Warranty||3-month refund and 1 year warranty.|
OSEA-ACCESSORIES ES E27 EDISON SCREW CAP SOCKET PENDANT CEILING LIGHT LAMP 100w BULB HOLDEROSEA-ACCESSORIES
- Suitable for double insulated Cabling & appliance, No earth Terminal. Es e27 edison screw cap socket pendant ceiling light lamp 100w bulb holder. Can not be used with standard lamp shade fixing or replacement stand alone lamp holder only.
Make sure to confirm the appliances Voltage before installation Or consult a qualified electrical engineer. Made from metal and heat resistant Plastic, suitable for upto 100 Watt lighting.
Luminosa E27 to B22 Lamp Socket Adapter Socket Converter Pack of 2/ Edison Large Screw to Bayonet Bulb Socket Adapter/LED Lamp Socket Adaptor Convertor/CE Certified / 1 Year WarrantyLuminosa
- Ce certified: high quality with 1 year warranty. Material: e27 iron with plated nickel / Body: Flame resistant PBT. A well made and excellently fit, cost effective solution to connect a bayonet B22 light bulb in an Edison E27 large screw fit socket.
This pack contains two E27 to B22 lamp socket converters. 100% work perfectly guaranteed.
|Height||3.2 cm (1.26 Inches)|
|Length||5 cm (1.97 Inches)|
|Weight||0.03 kg (0.07 Pounds)|
|Width||3.2 cm (1.26 Inches)|
|Warranty||1 year warranty.|
Luminosa B22 to E14 LED Edison Smart Bulb Lamp Adapter Holder Converter Pack of 2 adapters / Bayonet B22 to E14 Edison Small Screw Base Socket Lamp Adaptor Convertor/CE Certified/Energy Class ALuminosa
- This pack contains two B22 to E14 lamp socket converters. Material: e14 iron with plated nickel / B22 aluminium / Body: Flame resistant PBT.
Ce certified: high quality with 1 year warranty. A well made and excellently fit, cost effective solution to connect an E14 light bulb in a bayonet fit lamp socket. 100% work perfectly guaranteed.
JUNSHI 4-Pack B22 to E27 Adapter Lamp Socket Converter Maximum Wattage 200W Heat Resistant up to 150℃ Fire Resistant Converts B22 Bayonet Fitting to E27 Edison Screw-in SocketJUNSHI
- Application: junshi b22 to e27 lamp Holder Adapter converts a bayonet cap fitting to an edison screw fitting. Certificate:ce and rohs certificated for eu market.
Junshi"products are sold by "Htmart" Store only and shipped by AMAZON. If you purchase a product from another seller, please request a refund as it is a counterfeit. Safty:the product is made with fire retardant pbt and The aging resistance is high, Heat Resistant.
Convenient installation for a wide range of security, 100% safe from electric flaming, high reliability. Introduction: include 4pcs B22 to E27 Converter. Wattage/ voltage: this lamp socket converter can be used with a Maximum Watts of 200W, the Maximum Voltage of 250V and the Maximum current is 2A.
Bluelover Edison Screw ES E27 Light Bulb Lamp Holder Pendant Socket Black Style + Guitar keychainHonFitat
- Rated current: 4A. Rated voltage: 250V. Material: metal + heat resistant plastic. Have cE certification.
E27 Screw Lamp Holder, ES Lamp Holder Black, Black, Bakelite Pedestal Light Bulb Socket, PEBA Ceiling Pendant Light Fitting, Suitable for Edison Bulbs, Lamp Holder E27, E27 Bulb Holders, 5-PackPEBA
- It can be used for diy chandelier, decorating living room, kitchen, dining room and office etc. High qualitypeba e27 lamp holder has passed ce certification and is made of bakelite. Applicationlight bulb holder is suitable for all e27 lamps: LED incandescent lamps, halogen lamps and energy-saving lamps up to 60 W.
Turn the lamp holder in the opposite direction to open it. Classic designblack old-fashioned solid bakelite socket, with antique and industrial appearance, can be perfectly matched with light bulbs of different shapes and colors.
Environmental protectionlight adapter has no buckle, which makes it easy to adjust the power cord. Add a lampshade with a diameter of 40mm and adjust the wire length to produce different decorative effects.
If you have any questions, please contact PEBA directly, because your 100% satisfaction is our top priority. Voltage: 0-250v; Current: 4a. Quality servicepeba promises to provide you with 24/7 online service, 90 days refund policy and 24 months support. It can be reused and disassembled freely, which is more environmentally friendly and convenient. It has the characteristics of fire resistance, heat resistance up to 180°C and corrosion resistance.
With Metal Cord Clips, Bulb Holder Black,Vintage Metal Light Bulb Fittings, PebaMatt Black,3 Pack, Edison Screw Light Bulb Socket Adapter, Lampshade Mountable, E27 Lamp HolderPEBA
- Comes with a manual, which allows you to complete DIY projects in a short time. Service and warrantypeba promises you 24/7 online service, please contact PEBA directly, 90 days refund policy and 24 months support. Easy to installcorrectly connect the wire to the positive/negative pole, and then assemble all the parts together.
Widely usedthe e27 light fitting is suitable for all e27 screw-in lamps up to 60 W, such as LEDs, incandescent lamps, halogen lamps and energy-saving lamps.
Safe and durablethe ce certified peba lamp holder made of internal insulating material has excellent insulation performance, high safety, flame resistance and heat resistance up to 180°C. It is safer than traditional ceramic lamp holders.
Applicable occasions1 thebulb holder can add different lampshades and adjust the line length to bring various decorative effects. If you have any questions, because your 100% satisfaction is our top priority. It can support 220v-250V rated voltage and 4A rated current. 2 e27 vintage socket can be installed indoors and other places, coffee shop, living room, dining room, such as study, bar, bedroom, etc.