As an Amazon Associate I earn from qualifying purchases.1. JPGhaha
Monobloc Hose Flexible Tap Connector 500mm Compressed Braided Supply Pipe Tail M10 x 1/2’’ BSP for Kitchen Bath Replacement 2 Pack
JPGhaha - Suitable for most standard toilets, faucets and single cold faucets. Applicable places: 2 flexible hose pipe tap tails for monobloc basin, which can be directly connected to kitchen and bathroom accessories. Packing size: 2 pieces stainless steel flexible tap pipes, which can be used to replace the hot and cold water joints in the bathroom.
High-quality inner tube: the inner tube adopts high-quality EPDM inner tube, which is anti-aging and not easy to corrode.
The outer diameter is 10mm. The total length of the hose is 500mm, the inner diameter of the copper joint is 6. 5mm, and the length of the copper tube is 42mm. Convenient installation: jpghaha’s copper pipe length design is moderate, the M10/10 mm long male end is connected to the integral faucet.
It is a must-have good thing for our homes in modern life. It is more convenient to use with a longer male end. Premium material: the outer flexible tap pipe is made of high-quality 304 stainless steel, anti-rust, high temperature resistance, 8 strands of precision braided anti-leakage, compression and explosion-proof, and the service life is longer than ordinary faucet connectors.
| Brand | JPGhaha |
| Manufacturer | JPGhaha |
| Height | 2.2 cm (0.87 Inches) |
| Length | 50 cm (19.69 Inches) |
| Weight | 0.17 kg (0.37 Pounds) |
| Width | 0 cm (0 Inches) |
2. RMTL
RMTL Pack of 2 Kitchen/ Bathroom Basin Monobloc Mixer Tap Connectors Flexi Pipes Tails British Standard Pipe M10 x1/2 Fitting 500mm
RMTL - This flexible braided pipe tap connector is perfect for connecting Bathroom Basin Monobloc Mixer Taps, 9mm inner bore. One side of the hose is m10 10mm and other side is 1/2inch female bsP thread with a 9mm Bore with a length of 300mm/600mm made from Flexible Braided from the highest quality grade 304 long-life stainless steel braided flexible hoses.
Package includes: x2 m10 10mm x ½” inch bSP 9mm Bore 300mm or 500mm Flexible Tap Connectors.
These flexible tap connectors are made of the highest quality grade 304 long-life stainless steel. This pipe is easy for installation. Most plumbing products are measured using bsp thread dimensions which measure 1/4 inch larger than that stated, therefore this 3/4 Inch BSP thread actually measures 1 Inch in diameter. Suitable for high-pressure water systems.
3. Xcel Home
Xcel Home™ WRAS Approved PushFit Flexible Connector 15mm x 15mm BSP 500mm Long | 3 Lengths Available | Tap Connectors for Kitchen Sink / Bathroom Basin Stainless Steel Braided Flexi Tail | 1 Pipe
Xcel Home - Full re-useable when required. Once attached, the lock is secure and watertight. One-step operation for quick and easy installation. Three lengths to choose from 300mm, 500mm and 900mm.
This product is wras approved. Wras approval is accepted by every water supplier in the UK. Wras is a certification mark that demonstrates that an item complies with the high standards set out by water regulations.
Simply place piping into push-fitting and the latching mechanism will lock onto it securely. Installed pipes are demountable, just push the outer ring inwards and pull the pipe out to detach. 1 x xcel home branded push-fit 15-millimetres x Push-Fit 15-millimetres BSP British Standard Pipe flexi connector.
| Brand | Xcel Home |
| Manufacturer | Xcel Home |
| Height | 2.8 cm (1.1 Inches) |
| Length | 50 cm (19.69 Inches) |
| Width | 2.8 cm (1.1 Inches) |
4. Xcel Home
Xcel Home™ WRAS Approved PushFit Flexible Connector 22mm x 22mm BSP 500mm Long | 2 Lengths Available | Tap Connectors for Kitchen Sink / Bathroom Basin Stainless Steel Braided Flexi Tail | 1 Pipe
Xcel Home - Installed pipes are demountable, just push the outer ring inwards and pull the pipe out to detach. Wras is a certification mark that demonstrates that an item complies with the high standards set out by water regulations.
Wras approval is accepted by every water supplier in the UK. 1 x xcel home branded push-fit 22-millimetres x 22-millimetres British Standard Pipe BSP flexi connector.
Two lengths to choose from 300mm and 500mm. One-step operation for quick and easy installation. Full re-useable when required. Once attached, the lock is secure and watertight. This product is wras approved. Simply place piping into push-fitting and the latching mechanism will lock onto it securely.
| Brand | Xcel Home |
| Manufacturer | Xcel Home |
| Height | 3.4 cm (1.34 Inches) |
| Length | 50 cm (19.69 Inches) |
| Width | 3.4 cm (1.34 Inches) |
5. Xcel Home
Xcel Home™ WRAS Approved PushFit Flexible Connector 22mm x 1/2" BSP 500mm Long | 2 Lengths Available | Tap Connectors for Kitchen Sink / Bathroom Basin Stainless Steel Braided Flexi Tail | 1 Pipe
Xcel Home - Two lengths to choose from 300mm and 500mm. 1 x xcel home branded push-fit 22-millimetres x half-inch British Standard Pipe BSP flexi connector.
Wras approval is accepted by every water supplier in the UK. Once attached, the lock is secure and watertight. This product is wras approved. Simply place piping into push-fitting and the latching mechanism will lock onto it securely.
Installed pipes are demountable, just push the outer ring inwards and pull the pipe out to detach. Wras is a certification mark that demonstrates that an item complies with the high standards set out by water regulations. One-step operation for quick and easy installation. Full re-useable when required.
| Brand | Xcel Home |
| Manufacturer | Xcel Home |
| Height | 3.4 cm (1.34 Inches) |
| Length | 50 cm (19.69 Inches) |
| Width | 3.4 cm (1.34 Inches) |
6. Aumix
Aumix x2 Pair 15mm x 3/4” inch 12mm Bore 500mm Flexible Braided Pipe Tap Connector Hose WRAS Approved
Aumix - You will receive x2 15mm x 3/4” inch 12mm Bore 500mm Flexible Tap Connectors. This flexible braided Pipe Tap Connector Hose is perfect for connecting pipes to taps. Wras approval is accepted by every water supplier in the UK.
If your thread measures 3/4 Inch in diameter then you require the 1/2 Inch version of this product. Wras approved - wras, which stands for water regulations advisory scheme, is a certification mark that demonstrates that an item or package complies with the high standards set out by water regulations.
Important sizing note - most plumbing products are measured using bsp thread dimensions which measure 1/4 inch larger than that stated, therefore this 3/4 Inch BSP thread actually measures 1 Inch in diameter.
One side is 15mm the other is ¾” inch with a 12mm bore with a length of 500mm made from Flexible Braided from the highest quality grade 304 long life stainless steel braided flexible hoses, which is highly durable.
7. Xcel Home
Xcel Home™ WRAS Approved PushFit Flexible Connector 15mm x 1/2" BSP 500mm Long | 3 Lengths Available | Tap Connectors for Kitchen Sink / Bathroom Basin Stainless Steel Braided Flexi Tail | 1 Pipe
Xcel Home - Wras is a certification mark that demonstrates that an item complies with the high standards set out by water regulations. Simply place piping into push-fitting and the latching mechanism will lock onto it securely.
Installed pipes are demountable, just push the outer ring inwards and pull the pipe out to detach. Wras approval is accepted by every water supplier in the UK.
Three lengths to choose from 300mm, 500mm and 900mm. This product is wras approved. 1 x xcel home branded push-fit 15-millimetres x 1/2-inch British Standard Pipe BSP flexi connector. One-step operation for quick and easy installation. Once attached, the lock is secure and watertight. Full re-useable when required.
| Brand | Xcel Home |
| Manufacturer | Xcel Home |
| Height | 2.8 cm (1.1 Inches) |
| Length | 50 cm (19.69 Inches) |
| Width | 2.8 cm (1.1 Inches) |
8. Aumix
Aumix x2 Pair M10 10mm x ½” inch BSP 9mm Bore 500mm Flexible Braided Pipe Bathroom Basin Monobloc Mixer Tap Connector Hose WRAS Approved
Aumix - Suitable for high pressure water systems. Wras approved - wras, which stands for water regulations advisory scheme, is a certification mark that demonstrates that an item or package complies with the high standards set out by water regulations.
One side of the hose is m10 10mm and other side is 1/2inch female bsp thread with a 9mm Bore with a length of 500mm made from Flexible Braided from the highest quality grade 304 long life stainless steel braided flexible hoses, which is highly durable.
Important sizing note - most plumbing products are measured using BSP thread dimensions which measure 1/4 inch larger than that stated, therefore this 3/4 Inch BSP thread actually measures 1 Inch in diameter.
This flexible braided pipe tap connector is perfect for connecting Bathroom Basin Monobloc Mixer Taps, 9mm inner bore. You will receive x2 m10 10mm x ½” inch BSP 9mm Bore 500mm Flexible Tap Connectors. Wras approval is accepted by every water supplier in the UK.
9. Huayue
M10 x 1/2 BSP x 500mm Stainless Steel Braided Flexi Water Hose Flexible Pipe Connection Hose Extension for Basin, Kitchen Taps, Huayue 4 Packs Monobloc Flexible Tap Connectors
Huayue - Perfect replacement parts: flexible pipe can perfectly replace the old and leaky faucet hose, and can be connected directly to the kitchen sink or bathroom basin to help you continue to use the existing faucet. Safe material: the exterior flexible tap connector of is made of braided stainless steel, and the interior is ternary rubber, high temperature resistance and no deformation, rustproof and durable, strong anti-aging, effectively prevent the explosion of the pipe accident.
Standard specifications: flexible connection hose tap has 2 nuts with rubber washers for connecting to 10mm standard kitchen sink taps. One end is a 10mm tail end and the other end is a 1/2 BSP thread fitting.
Save your money. Perfect replacement parts: flexible pipe can perfectly replace the old and leaky faucet hose, and can be connected directly to the kitchen sink or bathroom basin to help you continue to use the existing faucet. Easy to install: 4 packs braided hoses is installed quickly, simple and convenient, saving your time. Save your money. The length is 500mm. Suitable for most standard toilets, no tools needs, taps and single cold taps.
10. Wärmer System
Basin and Sink Mixers,Tap Tails Connector for Mixer Taps,Flexible Tap Tails Replacement, Wärmer System M10 x 15mm Copper Tap Tails for Monobloc
Wärmer System - Stronger durability: made of copper. Easy installation: they are very easy to fit. They don't get twisted on tightening up.
The m10 thread screw straight into the bottom of the Monoblock, basin or sink tap. Compatible with different fittings: The 15mm end could go into a compression fitting, a fitting that includes solder or a fitting that would need solder.
This tap tails are more durable than flexi tap tails due to material they are made of. Direct flexi tails replacement: This copper tap tails are more reliable and offer that extra support to the taps to prevent them from moving or becoming loose.
JPGhaha - Suitable for most standard toilets, faucets and single cold faucets. Applicable places: 2 flexible hose pipe tap tails for monobloc basin, which can be directly connected to kitchen and bathroom accessories. Packing size: 2 pieces stainless steel flexible tap pipes, which can be used to replace the hot and cold water joints in the bathroom.
RMTL - This flexible braided pipe tap connector is perfect for connecting Bathroom Basin Monobloc Mixer Taps, 9mm inner bore. One side of the hose is m10 10mm and other side is 1/2inch female bsP thread with a 9mm Bore with a length of 300mm/600mm made from Flexible Braided from the highest quality grade 304 long-life stainless steel braided flexible hoses.
Xcel Home - Full re-useable when required. Once attached, the lock is secure and watertight. One-step operation for quick and easy installation. Three lengths to choose from 300mm, 500mm and 900mm.
Xcel Home - Two lengths to choose from 300mm and 500mm. 1 x xcel home branded push-fit 22-millimetres x half-inch British Standard Pipe BSP flexi connector.
Aumix - You will receive x2 15mm x 3/4” inch 12mm Bore 500mm Flexible Tap Connectors. This flexible braided Pipe Tap Connector Hose is perfect for connecting pipes to taps. Wras approval is accepted by every water supplier in the UK.
Aumix - Suitable for high pressure water systems. Wras approved - wras, which stands for water regulations advisory scheme, is a certification mark that demonstrates that an item or package complies with the high standards set out by water regulations.
Huayue - Perfect replacement parts: flexible pipe can perfectly replace the old and leaky faucet hose, and can be connected directly to the kitchen sink or bathroom basin to help you continue to use the existing faucet. Safe material: the exterior flexible tap connector of is made of braided stainless steel, and the interior is ternary rubber, high temperature resistance and no deformation, rustproof and durable, strong anti-aging, effectively prevent the explosion of the pipe accident.
Wärmer System - Stronger durability: made of copper. Easy installation: they are very easy to fit. They don't get twisted on tightening up.
